Retrofit VAV Control Sections
The MHServices BRMS range of replacement VAV control damper sections, fully fitted with full Belimo controls and ready to use today
The BRMS range of VAV damper control sections is ideal for the replacement of faulty VAV dampers which are either no longer available or difficult to access in the existing VAV units. The BRMS unit is simply cut into the primary ductwork serving the existing VAV unit and then provides a new damper and flow station which is used in conjunction with the existing VAV attenuator. The BRMS offers a cost effective solution and saves the need for major mechanical works in replacing faulty VAV dampers and at the same time allows the existing re-heats to be retained.
The BRMS flow station is produced with a galvanised steel case and blade with class-3 blade seal and special drive/motor bracket.
Size DIA ‘D’
|
Length ‘A’
|
Length ‘B’
|
Nominal (100%) Flow
|
100
|
215
|
295
|
100l/s
|
125
|
215
|
295
|
125l/s
|
160
|
215
|
295
|
210l/s
|
200
|
215
|
295
|
400/s
|
250
|
285
|
365
|
600l/s
|
315
|
285
|
365
|
800l/s
|